Showing posts with label construction. Show all posts
Showing posts with label construction. Show all posts

Sunday, February 24, 2008

Control Panel construction (cont)

Mounting the Namco joystick onto the drawer has one drawback, I'm loosing four buttons. I set them up to handle coin and P1 start as well as ESC (to exit back to the front end) and TAB (to make changes inside MAME OSX. I have a few options here, the first is to drill holes in the drawer and just add ordinary pushbuttons to replace them but I'm not to fond of that idea. Instead I've been looking at some other options. 

1) Navimec navigation buttons:
I really like this one for frontend navigation but it doesn't make sense in-game where I need insert credit and start buttons. 

2) Art Lebedev's Optimus Mini Three:
This is more interesting but also more expensive. Since the keys are actually tiny monitors the images inside the buttons can change. This means I can have up, down and select buttons for the front end and Insert credit, start and ESC buttons for MAME. Also, it will probably look amazing with some nice artwork. The downside is that I need to add a USB hub and, of course, the price...

Wednesday, February 20, 2008

Control panel construction


Researching different types of cocktail cabinet control panels I decided to go for a classic vertical mount instead.  The joystick will be mounted into the front of the drawer, this time by a professional carpenter. So, stay posted, this will probably be ready beginning next week.

Below are two types of classic control panels, I will go for the top one but at 90°. A protruding control panel will destroy the look of the cabinet so I wanted to try this first. I can always adjust the angle later.

Sunday, February 17, 2008

Ramvik

I decided to use Ramvik from IKEA as the base of my Mamebook Cocktail. The best part is that the tempered glass is included.

Saturday, January 19, 2008

How to build your own Mamebook (continued)

1) For this step, you need a Ramvik side table from IKEA. Before assembly, take the top shelf, and make the necessary measurements for the hole where the Powerbook will sit. Allow for some extra space for cables:


2) Once the hole is made, check that everything fits. The hole will be covered later with a bezel so don't worry too much about looks at this point.


3) Since the Powerbook is thicker than the shelf I added spacers to make the screen flush with the top. 


4) Here, Ramvik is almost finished and you can see how thin the Powerbook really is. It's merely 9 mm thicker than the shelf. The bezel and glass in in place here as well. The bezel is made out of 160 g black paper. Be sure to get the kind that's dyed through, otherwise you'll end up with white lines where you make the cuts.



I just connected a Namco PSX Arcade stick with a USB adapter and put it inside the drawer. Coming up; replacing the drawer with a proper control panel. Stay posted!



How to build your own Mamebook

1) Remove the hinges from an old Powerbook G4:

2) Double sided tape:

3) Fold the screen the wrong way around:

Front

Back: